Finished posts. The titanium turned out to be very easy to work with. The carbide insert boring bar left a fantastic finish on the precision bored insides. The bead blaster made the nice satin finish on the outside. The 2 holes are .093 clearance for a pair of 2-56 screws. The lip of the part is a 2.5 inch radius holesaw cut of 1/4 inch away from the axial centerline.
20060724
Finished posts
Finished posts. The titanium turned out to be very easy to work with. The carbide insert boring bar left a fantastic finish on the precision bored insides. The bead blaster made the nice satin finish on the outside. The 2 holes are .093 clearance for a pair of 2-56 screws. The lip of the part is a 2.5 inch radius holesaw cut of 1/4 inch away from the axial centerline.
